Safe Food Training MN Archives

December 23, 2019December 23, 2019

Applying Product Traceability Software for Smarter Food Safety

smarter food safety product traceability

Back in October, we covered a public forum put on by the FDA concerning the future of food safety. Just recently, the FDA has released the transcripts from nearly every session, giving those of us in the food safety training industry plenty of material to dig through concerning their vision for the future of food safety in our country. This week we’d like to take a look at a few of the ideas presented at the New Ara of Smarter Food Safety meeting involving the use of product traceability technology to quickly find the source of foodborne illness outbreaks.

Achieving Smarter Food Safety in the Supply Chain Using product Traceability Software

When it comes to foodborne illness tracing, it would be ideal if the FDA and CDC could immediately identify the source of contamination. For example, if someone consumes tainted lettuce in Minnesota and becomes ill, the FDA could find out the source of the contaminated product in New Mexico and take immediate action. This isn’t exactly possible with the way the supply chain works today.

Raw food products come from many different parts of the country, and certified food managers may receive a shipment of greens from California one week and Arizona the next. In fact, there are many occasions where the warehouse run by your food supplier has very little information about where your product originated. In the case of an outbreak, it takes some time to figure out exactly where the tainted product came from, potentially leaving the door open for the further spread of illness.

The big question is; How can we solve this?

During a Smarter Food Safetypresentation on product traceability, a spokesperson from the software company FoodLogiq suggested that advanced software could be used to create a roadmap for the entire supply chain. This would mean that software could be used at all levels of the supply chain from growers and farmers to individual food service facilities such as restaurants and retail producers to instantly tell you the travel history of any given product from farm to fork. But is this feasible?

We think this is a great idea, but it would take time to implement. As it stands now, there is no one high-tech method being endorsed for product traceability. That means one shipper could use a different system than another, and along the way product can’t be traced due to conflicting systems. There also appears to be little incentive for smaller operations to use this software. Small one outlet restaurants and independent farmers have enough on their plate without having to research, purchase and maintain tracking software.

If the FDA Era of Smarter Food Safety vision can come up with a product traceability standard to track nearly every single ingredient, foodborne illness outbreaks can be easily contained. Do you think an overarching tracing system could be implemented to track product and stop outbreaks before they become widespread?

November 24, 2019November 24, 2019

Certified Food Protection Manager Procedures for Fires

Certified Food Protection Manager Fire Procedures

Fires are something we never like to think about, but something we should prepare for. The kitchen is a hot place, there’s plenty of open flame, electrical systems running at full capacity and other risks that may result in a fire that causes damage to your kitchen or other parts of your restaurant. So what procedures should a certified food protection manager put in place to address a fire in the kitchen?

Fire Procedures for Certified Food Protection Managers

Certified food protection managers should have a protocol for dealing with fires. If you don’t already have clear procedures for what to do in the event of a fire, sit down with your staff and develop a plan. Your plan should answer the following questions:

Is the fire containable?
Should I extinguish or evacuate?
When is it safe to reopen?
What product is salvageable?

If you do have a fire, chances are it won’t be as devastating as the worst-case scenario, but you should still remain calm and take action. If your fire is easily extinguishable, make sure you use a non-water based extinguisher. Oil and grease are common factors in kitchen fires, and water will cause the fire to spread. If you need help developing a plan for what to do in the event of a fire, contact your insurance agent or local fire department. In many cases, a representative from one of these agencies will gladly provide an on-site inspection and offer advice.

After your fire is out, determine whether it is prudent to continue operations. If you’ve had a fire which requires the use of your fire-suppression system or assistance from the fire department, you may need clearance from the local fire marshal and health department to resume operations.

Before you begin operations once again, food safety must be at the forefront of your decision. Take the following steps before returning to normal operating procedures:

Inspect containers for fire damage
Dispose of food in storage and refrigeration close to active fires
Dispose of product left in the danger zone
Clean and sanitize all utensils and surfaces affected by smoke

Cans heated by fire should be thrown away. Food inside cans may begin to cook at low temperatures causing bacteria to grow. Open produce and other product in storage areas that have seen smoke should also be disposed of, including the insides of refrigerators. Many industrial refrigeration units are not air tight, so product inside can become contaminated by smoke. If you lose electricity or food becomes warmed by the fire, it must be disposed of. If any product spends excessive time between 41 and 135 degrees, it must be disposed of. The old adage should apply here: When in doubt, throw it out.

Do you have a plan in the event of a fire?

November 18, 2019November 7, 2019

Online Food Safety Training for Cooking Whole Turkeys

Thanksgiving is here and that means it’s time to overindulge on turkey, mashed potatoes, gravy and pumpkin pie, but the last thing you want to include in your festivities is a salmonella outbreak. Whole turkeys can take quite some time to cook and it may be difficult to achieve safe temperatures while keeping the meat moist and flavorful. This week, we’ll look into what food safety training recommends to cook a tasty turkey without a side of foodborne illness.

Food Safety Training tips for Properly Cooking Whole Turkeys

Whole turkeys can be tricky to cook properly because of the thickness of the breast. One part of the turkey can be cooked perfectly, but the center can be left an undercooked breeding ground for bacteria. In order to prevent this scenario, we have three food safety training tips for a properly cooked turkey:

Use fresh or fully thawed birds
Check internal temperature properly
Prepare stuffing separately

Partially thawed turkeys are a food safety nightmare. While the outer layers may feel thawed and ready to cook, the center of the thickest parts of the bird may still be frozen. This can add to the cooking time of larger turkeys. It can also result in vastly overcooked outer layers while still leaving the thickest section undercooked. Half-thawed birds may also cause complications when attempting to gauge the internal temperature. Outer layers may reach the proper temperature of 165-degrees well before the center, throwing off your thermometer’s readings for the innermost layers.

Many commercially sold turkeys come with a small probe that will supposedly let you know when your bird has reached a safe serving temperature. Our advice to you would be to remove this probe before cooking and place in the nearest garbage receptacle. The only accurate way to assess the internal temperature of large turkeys is to use a bi-metallic stem thermometer. Insert your probe thermometer into the thickest part of the turkey breast as deep as possible without touching any bones. If your thermometer reads 165 degrees for at least 15 seconds, you can be confident that your turkey has been fully cooked.

One final note concerning food safety training for turkey stuffing. Stuffing your turkey before cooking will increase the amount of time that it takes to fully cook your turkey and pose a salmonella risk. There is a very real possibility that your stuffing will not reach a high enough temperature to kill any bacteria at the same time as the rest of your turkey, so we strongly suggest you cook your stuffing separately.

Happy Thanksgiving from all of us at !

November 4, 2019October 10, 2019

Certified Food Safety Managers and Plastic Reduction

Over the past few years, some jurisdictions have sought to reduce the amount of plastic used in the foodservice industry, and while some businesses have been hesitant to make the change, many have embraced it. Eliminating plastic appeals to a wide selection of environmentally conscious consumers and can also potentially reduce the amount of waste your business produces. This week, we’ll cover a few plastic reduction alternatives certified food safety managers can utilize in their establishments.

Plastic Reduction Alternatives for Certified Food Safety Managers

If you were to take a quick tour of any restaurant, you’d find a number of plastic items. To-go boxes, bags, straws, utensils and take-out serving dishes are all commonly made from plastic. Whether you’re voluntarily reducing your plastic usage or your local jurisdiction has passed codes and laws preventing plastic use, your certified food manager will have to find alternatives for these types of items. Here are a few solutions that you can employ to replace plastic necessities in your facility:

Paper and compostable boxes and bags
Reusable takeout containers
Biodegradable utensils and straws

In the past, plastic bags and Styrofoam to-go containers have been go-to packaging for guests looking for take-out or a way to bring leftovers home. With current trends, many different manufacturers have started producing paper bags and compostable boxes that are either easily recyclable or will break down over time rather than take up space in a landfill. These items may cost a little bit extra, but as more companies produce these products costs should begin to decline.

With the latest update to the Minnesota Food Code, the rules concerning reusable containers have been updated and more clearly outlined. Reusable containers not only reduce plastic waste, they give you the opportunity to sell or provide your guests with reusable take-out containers with your logo and branding on them. This can not only help to conform to local plastic reduction codes but provide a valuable marketing tool for certified food managers to draw repeat business from loyal guests.

Straws and utensils such as forks, spoons and knives present unique challenges since many consumers prefer a sturdy utensil that won’t break during use. The good news is that many companies are now producing durable wood alternatives and great advances have been made to produce robust biodegradable utensils that can easily replace plastic.

Are you making an effort to reduce plastic waste in your facility?